FUEL Sledge (1.9) Wheel (fits SCX10 III) 3D Printer Model
The file 'FUEL Sledge (1.9) Wheel (fits SCX10 III) 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'FUEL Sledge (1.9) Wheel (fits SCX10 III) 3D Printer Model' is (stl) file type, size is 2.7MB.
1/10th scale sizing guide:
CenterCap: 19.49mm overall diameter (depending on your printer you may need to scale this down, the tolerances are tight.)
RearFace: 56mm overall diameter
Face: 56.5mm overall diameter
CenterRing: 60mm overall diameter
Or just print as a set, the center ring is 60mm overall diameter and everything else should fall into place. (you must use supports)
I have a set of these on my real Gladiator but I couldn't find a 1/10 replica for my SCX10 III Gladiator to save my life, so I modeled a set. Not 100% identical, but close enough, has a good offset, fits my hubs, and the center cap actually screws in. They are a bit wider than most standard 1.9 wheels. I print at 100% infill for all the weight/durability I can get. They seem to crawl just fine, although I haven't put them through anything too extreme.
If you have any ideas for a cool wheel I can try to model, let me know.
If you're interested in random parts for RC Rock Crawlers, I have a bunch of random stuff here (some are specific to JLU/JT SCX10 III's but some are universal), including a set of Ion Alloy 141 wheels: https://www.thingiverse.com/thing:6700388
| Fuel_Sledge_CenterCap.stl | 487.1KB | |
| Fuel_Sledge_CenterRing.stl | 76.9KB | |
| Fuel_Sledge_Face.stl | 1.9MB | |
| Fuel_Sledge_RearFace.stl | 1.4MB | |
| RC_Wheel_FUEL_Sledge_60mm.stl | 4.1MB |
