FT Mini Arrow Power Pod (Fuselage Modified For 1500mah Battery) 3D Printer Model
The file 'FT Mini Arrow Power Pod (Fuselage Modified For 1500mah Battery) 3D Printer Model' is (stl) file type, size is 41.8KB.
The file 'FT Mini Arrow Power Pod (Fuselage Modified For 1500mah Battery) 3D Printer Model' is (stl) file type, size is 41.8KB.
FT Mini Arrow Power Pod. This power pod is for 2204 2300kV motor for a fuselage modified to fit a 1500mah battery. This fits snug into the fuselage allowing a good friction fit. I also found it weighed 2g LESS than the original foam pod.
I was having issues with the original power pod in that the motor was overheating. My guess was the motor was caught in the vortex of the blunt back and was not getting adequate air flow. THIS SOLVED THE OVERHEATING ISSUE.
Mount/Pod has a channel for the wires. Interior cavity also aids in extending space for ESC. It does bring the COG back, but the 1500mah battery compensates for it.
The pod fits into a fuselage cavity measuring 35mm x 28mm.
| Modified_FT_Arrow_PowerPod.stl | 172.1KB |
