Fruit Tree (Modular) 3D Printer Model
The file 'Fruit Tree (Modular) 3D Printer Model' is (STL,zip) file type, size is 14.1MB.
The file 'Fruit Tree (Modular) 3D Printer Model' is (STL,zip) file type, size is 14.1MB.
Grow a tree with your 3D printer!
Build your own custom fruit tree. Change it within seconds to have it fit to your latest fruits. Pieces snap together and the tree is stable. The fruits are hold in spirals that bend down and wrap around the fruit.
It is customize able with different branches, trunk pieces, leaves and roots. Start small and let it grow higher.
Check out how it works in this animation: https://www.youtube.com/watch?v=pByeTKZoU_U
No support required and it also prints with small 120x120mm printer. You could also go crazy with colors with just a single extruder printer.
You can of course also use it to hold other things then just fruits.
[Update: Very slighlty increased the trunk connections tolerance. Because I tested it with a very high infill and it turned out that disconnecting is too hard with it. The updated version works now also fine with very high infill. If you like the lower tolerance version, they are in the Trunk-Pieces_Lower-Tolerance.zip now.]
| Branch-Big.STL | 1.2MB | |
| Branch-Normal-long.STL | 1.1MB | |
| Branch-Normal.STL | 1.0MB | |
| Branch-Small.STL | 1.3MB | |
| Branch-VerySmall.STL | 1.7MB | |
| Crown-LeavesTop.STL | 1.3MB | |
| Leave.STL | 541.5KB | |
| Root-Long.STL | 541.4KB | |
| Root-Normal-Straight.STL | 541.4KB | |
| Root-Normal-Wavy.STL | 541.4KB | |
| Root-Small-Straight.STL | 541.4KB | |
| Root-Small-Wavy.STL | 541.4KB | |
| Trunk-0xSlot-2xLength_NT.STL | 1.0MB | |
| Trunk-0xSlot-3xLength_NT.STL | 1.3MB | |
| Trunk-0xSlot_NT.STL | 813.4KB | |
| Trunk-1xSlot_NT.STL | 918.8KB | |
| Trunk-2xSlot_NT.STL | 1.0MB | |
| Trunk-3xSlot_NT.STL | 1.1MB | |
| Trunk-Base-Alt-ClosedBottom_NT.STL | 1.4MB | |
| Trunk-Base-HiddenCase_NT.STL | 1.1MB | |
| Trunk-Base_NT.STL | 1.6MB | |
| Trunk-Crown_NT.STL | 1.9MB | |
| Trunk-Pieces_Lower-Tolerance.zip | 4.9MB |
