Frosthaven Summons: Dampening Unit 3D Printer Model
The file 'Frosthaven Summons: Dampening Unit 3D Printer Model' is (stl) file type, size is 825.9KB.
The file 'Frosthaven Summons: Dampening Unit 3D Printer Model' is (stl) file type, size is 825.9KB.
Here's my proxy model for the Frosthaven Summons, the Dampening Unit! The artwork for this guy is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-dampening-unit-front.png. As you can see, it's a very horizontal character, so I scaled it to just barely fit on a round base… but honestly, it doesn't even need a base and so you'd probably be pretty well served by scaling it up to about 150% and letting the front and the back align with the long corner-to-corner orientation of a hex.
This guy needs no support, so the print is nice and easy!
As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!
| Dampening_Unit.stl | 2.1MB |
