I wanted to have a nice front panel for my Ikea Lack Enclosure with some buttons to turn on the printer, some LED ans the Raspberry Pi.
I designed this really simple front panel with three holes (20mm) for the buttons and on the other side, added the Prusa logo to make it nicer :)
The Switches that I used are from Mountain Switch (Model : R13-135). You can find them with or without the light and also in other colors. I find them on Mouser Electronics and they ship Worldwide.
I've printed it front face down with supports and the print quality is nice.
Modify it as you want and leave a Like if you downloaded it :)
Don't hesitate to leave a comment if you have a question and a Make if you made it.
Thanks for the support
UPDATE 1 :
I added some supports on the back of the front panel due to the pressure on the buttons
UPDATE 2 :
I Installed mine with some strong double sided tape and there is enough contact surface to hold the pieces and nothing moves. Everything works fine.
| Front_Panel_Button.stl | 2.0MB | |
| Front_Panel_Logo.stl | 718.1KB |
