Front Grip Resized For Caliburn 3D Printer Model
The file 'Front Grip Resized For Caliburn 3D Printer Model' is (stl) file type, size is 501.2KB.
The file 'Front Grip Resized For Caliburn 3D Printer Model' is (stl) file type, size is 501.2KB.
Slight changes to SBSExtensions' grip1 front grip to better fit the full MR_Foregrip version of the Caliburn pump action Nerf blaster. The grip is a nice fit for the Caliburn, but needed some adjustments to support the pressures from being used as a pump-action.
The longer grip version moves back the grip-railing end so that the grip contacts the front of the pump-railing to support during priming. The screw keeps the grip in place during a return push of the pump.
The shorter version cuts off about an inch from the back of the grip and moves the screw hole. Both versions will work with around an M4 screw. Pictured is the shorter grip version with an M5 screw because that was the only one I had laying around.
| SBS_Grip1_Longer_Caliburn.stl | 1.6MB | |
| SBS_Grip1_Shorter_Caliburn.stl | 1.6MB |
