Frog Plug With Hole For Cord 3D Printer Model
The file 'Frog Plug With Hole For Cord 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'Frog Plug With Hole For Cord 3D Printer Model' is (stl) file type, size is 2.2MB.
This is a beveled plug with a decorative frog & flower design. It has a 8mm diameter hole on the backside to allow one to thread cord / paracord through it. This plug was designed to fit into a funnel that connects to a buried water reservoir (https://www.thingiverse.com/thing:6641003). The frog provides the grip-able handle, so that the plug can be lifted out and one can check the water level in the reservoir with a dipstick (https://www.thingiverse.com/thing:6640962).
Attributions: Many thanks to YahooJAPAN for the Frog model, and to MQuirogaB for the Flower#2 model.
The frog was scaled to 70% in all directions, and the flower was recessed 1mm into the funnel cap to quickly created the raised flower outline underneath the frog.
Dimensions: the plug/base is 10mm thick, with an upper diameter of 51.8mm and a lower diameter of 42.8mm.
| Cap1_separate.stl | 63.3KB | |
| FrogPlugLid.stl | 3.5MB |
