Fritzbox 7590 AX External Antenna Case Mounts 3D Printer Model
The file 'Fritzbox 7590 AX External Antenna Case Mounts 3D Printer Model' is (stl) file type, size is 2.1KB.
The file 'Fritzbox 7590 AX External Antenna Case Mounts 3D Printer Model' is (stl) file type, size is 2.1KB.
External Antenna mounts for fritzbox 7590 AX
May fit other variants. let me know.
!!! Involves cutting holes in the air vents !!!
The square one fits the vents in the backside. I put mine over the usb port. Cut the vents with cable cutters or nail clippers and sand the edges clean. This one gets glued into place. you can install as many as you like.
The odd one replaces one internal antenna. Its placed on the side of the board and has the same shape. If it doesnt come out, its held in place with some tesa film. Just pull it out and put the mount in. Cut the vents next to the hole and clean the edges. it doesnt require glue because its held in place with the former antenna fixture.
Dont worry about overheating because you coverd some vents. It has more than enough vents and airflow to compensate for those small changes.
| Antenna_mount_Side.stl | 5.6KB | |
| Antenna_mount_Square.stl | 4.8KB |
