This is a Wallmount for Fritz!Box 7530 for use with easy removeable Tesa Powerstrips.
(I used the light ones: Poster Strips)
You need 2 additional Screws.(they need to cut to 10mm length)
I also used 4x Tesa Posterstrips (each holds about 200g, so in Total= 0,8 kg)
You can also use 2 Tesa Power Strips or 4, they are removeable without tearing down the wall.
There is extra space behind the Fritz!Box for efficient heatflow.
(In my Case the Temperature dropped about 12°C on Idle)
Printed on a Renkforce RF1000
PLA, 220°C
Heatbed 60°C
Resolution 0.1
Infill: 40%
| FritzBox_Halter.stl | 3.1MB | |
| FritzBox_Halter_Abstand.stl | 768.4KB |
