Fridge Door Fence-post (for Whirlpool Refrigerators And Freezers) 3D Printer Model
The file 'Fridge Door Fence-post (for Whirlpool Refrigerators And Freezers) 3D Printer Model' is (scad,stl) file type, size is 2.0KB.
The file 'Fridge Door Fence-post (for Whirlpool Refrigerators And Freezers) 3D Printer Model' is (scad,stl) file type, size is 2.0KB.
My fridge's door doesn't have much keeping things from falling off the shelves—just a single horizontal rail in front of each shelf, leaving an ample gap between the rail and the shelf. So, of course, anything smaller than that gap has a tendency to fall out when the door is opened (yay inertia!).
Hence these fence-posts, which clip on to that rail to keep stuff from falling out. Print as many as you need; you choose the spacing.
The parameters of this fence-post as supplied are fit for my Whirlpool refrigerator's shelf guardrails, which are 8 mm thick and one inch tall; you should measure your fridge's guardrails and adjust accordingly (if necessary) in the Customizer.
(Even if yours is a Whirlpool. Your model/vintage may have different guardrails.)
| fridge_door_fence.scad | 2.1KB | |
| fridge_door_fence.stl | 15.3KB |
