Free/busy Sign – Frei/belegt Schild 3D Printer Model
The file 'Free/busy Sign – Frei/belegt Schild 3D Printer Model' is (stl) file type, size is 102.3KB.
The file 'Free/busy Sign – Frei/belegt Schild 3D Printer Model' is (stl) file type, size is 102.3KB.
a folding sign for the door to indicate whether it is occupied or free.
the sign is printed in 1, 2 or 3 colors.
the base plate is printed in one color (preferably light).
the labeling plates are printed in two colors - black on the back and red or green on the top (without writing then print in one color).
print the front plate in two or three colors (with writing in 3 colors - core in black, left and right in red and green).
the following magnets are needed: 1x ø5 x 5mm / 2x ø4 x 3mm
the plate is held in place with a steel wire (ø0.8mm) or a straight bent paper clip (48mm long and bent 3mm on one side).
there are also neutral components that can be labeled according to your own ideas. the lettering should be 0.85mm deep.
| besetzt.stl | 54.5KB | |
| bitte_nicht.stl | 56.9KB | |
| frei.stl | 17.7KB | |
| grundplatte.stl | 38.2KB | |
| komm_rein.stl | 57.3KB | |
| leer_oben.stl | 61.8KB | |
| leer_unten.stl | 684.0B | |
| stoeren.stl | 138.6KB |
