Free-Standing Toilet Paper Stand 3D Printer Model
The file 'Free-Standing Toilet Paper Stand 3D Printer Model' is (stl) file type, size is 1.5MB.
The file 'Free-Standing Toilet Paper Stand 3D Printer Model' is (stl) file type, size is 1.5MB.
This is a free-standing toilet paper stand. It has threaded feet so you can slightly adjust it if it's not on a level surface and you can add any number of 200/220mm (holds 2 rolls) or 100/120mm (holds 1 roll) lengths. I say "200/220mm" because the usable length is 200mm and the threads are 20mm.
Everything screws together - no other parts or glue required - and there is a cap to cover up the top. The inside threads are longer so you can tighten it up nice and snug.
The pictures only show the 200/220mm lengths, but the 100/120mm length also works.
| Toilet_Paper_Stand_-_Base_v02.stl | 1.1MB | |
| Toilet_Paper_Stand_-_Cap_v02.stl | 510.9KB | |
| Toilet_Paper_Stand_-_Foot_v01.stl | 830.2KB | |
| Toilet_Paper_Stand_-_Segment_-100mm_v01.stl | 936.3KB | |
| Toilet_Paper_Stand_-_Segment_-200mm_v01.stl | 616.7KB |
