Free Optics-lab-kit 3D Printer Model
The file 'Free Optics-lab-kit 3D Printer Model' is (stl) file type, size is 204.7KB.
The file 'Free Optics-lab-kit 3D Printer Model' is (stl) file type, size is 204.7KB.
This is my approach to a free and low cost optics laboratory kit that could be used by schools and hobby scientists.
There are two versions:
The first can be mounted on a post using M3 screws, which would most likely be of use in a laboratory environment. The second one is thought to be used with an 20x20mm T-Slot profile aluminium extrusions for hobbyists.
I will design other components such as mirror/lens holder etc in the near future.
This Thing is a work in progress, so keep your eyes open for updates!
Safety notice:
This kit is supposed to be used with lasers. Please be careful when working with them. Even low power lasers like the ones you will find in cheap laser-pointers may cause unrepairable damage to your eyes. Do not use 3D printed parts when working with high-power lase-diodes (>10mW). Wear protective glasses.
| filter_holder_ring_turnable.stl | 393.1KB | |
| filter_housing.stl | 505.5KB | |
| filter_housing_clamp.stl | 142.8KB | |
| filter_housing_ring.stl | 362.7KB | |
| filter_housing_ring_T-slot.stl | 186.7KB | |
| filter_housing_ring_turnable_T-slot.stl | 291.5KB | |
| lens_housing_for_post_T-slot.stl | 412.9KB | |
| lens_housing_T-slot.stl | 367.0KB | |
| post_T-slot.stl | 165.3KB |
