Quick Freddy Krueger cutout for shadow casting -gobo per request - 2 of 4 in the series.

This one has some crazy details. Flashlight size would not be recommended unless you are printing with SLS as you can see from the attached photos. Larger than that and you would be fine. recommend printing this one as large as your bed can handle, and the uncheck the box for size lock and thin it down to 1-2 mm.

Just print a flat base of your choice, or combine with a base in your slicer. You can also just use a hot glue gun to mount it where feasible.

Print these the right size and you could even use them on a flashlight.

edit cleaned up the model on 10-19 - realized I had a few lingering items that were not connected. Re-uploaded corrected model. Also dropped in actual photos so you can see these are real, and not just some oddball computer generated junk that seems to get millions of views..... ;)

Printed on Anycubic PETG. I have a roll of white just sitting around, but you could use any color you have as long as it blocks light(no transparent). If you really need to you could spray with black chalkboard paint to make the shadow caster less visible in front of your light,

Affiliate Links Disclaimer - In a friendly gesture, I shares affiliate links to the products used in the projects or posts I make. While these links may earn a few pennies for me, rest assured that they are only recommended based on personal success and experience or I would not take the time to share them. And don't worry – purchasing through these links won't cost you a dime extra. if you are unsure drop them in your cart(so you don't lose it) and think about it while you do you research. If you find something better, pick it instead, and let me know so I can take look. You won't hurt my feelings.