Frank (Frankenstein) Bust 3D Printer Model
The file 'Frank (Frankenstein) Bust 3D Printer Model' is (stl) file type, size is 3.1MB.
The file 'Frank (Frankenstein) Bust 3D Printer Model' is (stl) file type, size is 3.1MB.
Remix of enginecogs wonderful Frankenstein Bust. I wanted less of the cartoon style and something more of a brute, so I have changed the proportions of the head in several ways. I also noticed that the neck bolts were not symmetrical in the original version, either for the individual bolts themselves or in relation to each other. I removed the original bolts completely and added a shaft where you can use actual metal bolts. These will be at a perfect angle, providing a more artificial look with no slop.
I also replaced the base of the bust completely to make it look heavier and less like a chess piece. To better fit the base I also rounded the shoulders.
The model is made to fit M8 neck bolts, with the hole slightly tighter than that. You can either drill the hole larger or use a tap - you might be able to simply screw the bolts in place, possibly by heating the bolt. For using smaller bolts, scale the model accordingly.
Photos show a print at 62.5% scale, 0.1mm layer height, printed at 40mm/s with 20% infill in PETG and using M5 bolts.
| frank_bust_v3.stl | 6.4MB |
![Mini Crosswalk Light With Changeable Signs [New Update 11/5/2023] 3D Printer Model](https://res.3axis.co/867dc6e0-6843-4d0c-a42e-2a5902710c74/images/aabf5920-7891-4eb9-94f9-283d379dcb53_thumb.jpg)
