A set of simple designs for badge and card holders that fit standard credit, debit and other magnetic and RFID cards, US standard ID cards, US drivers licenses, with added slots for cards that have a smaller than standard corner radius, plus non-US licenses and ID cards.
Includes two different styles, one for portrait/vertical badges, and one for landscape/horizontal badges. Designed for only one thick RFID card, or two or fewer thinner magnetic strip cards.
ID-1:
Fits ISO/IEC 7810 ID-1 card sizes (85.60 × 53.98 mm) with an approximate ±250µm card size tolerance. Maximum card thickness at edge is about 1mm, depending on the cut accuracy of the card. Full fill material volume is about 5.6cm3.
ID-2:
Fits ISO/IEC 7810 ID-2 card sizes (105 x 74 mm) with an approximate ±275µm card size tolerance. Maximum card thickness at edge is about 1mm. Full fill material volume is about 8.7cm3.
If you print this, any feedback or printing preset information would be much appreciated.
| Framed_Badge_Holder_7810_ID-1_Landscape.stl | 201.5KB | |
| Framed_Badge_Holder_7810_ID-1_Portrait.stl | 201.5KB | |
| Framed_Badge_Holder_7810_ID-2_Landscape.stl | 196.1KB | |
| Framed_Badge_Holder_7810_ID-2_Portrait.stl | 195.7KB |
