########################################################################
NEW Single Cell LiPo Mod: https://www.thingiverse.com/thing:3585097/files
########################################################################
Frame for low-cost 6V/0.32A-1.92W DIY solar module. I built the module for this system: https://www.thingiverse.com/thing:3524121

• cheap (100 of these 52mm x 19mm solar cells cost around 8€. So you can build 8 of these 6V modules / ~16W)
• Several in series result in 12V, 18V, 24V...
• Quick to print
• The performance is actually achieved!

Edit: In the next few days I will cast one of these modules with polyester resin (very cheap resin) to measure how much power the weather resistance costs...

Shopping list:

• Solar cells: https://www.ebay.de/itm/100-pcs-Solar-Panels-0-5V-320mA-Cell-Charge-52-19mm-Blue-DIY-Useful-Practical/312557546251?hash=item48c5e1ab0b:g:sowAAOSw1V9cgPUZ&frcectupt=true
• Tabwire: https://www.ebay.de/itm/20-M-Tab-Wire-2M-DIY-Solar-Bus-Bar-Wire-Ribbon-10ml-Soldering-Flux-Pen-M7W7/263561778624?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
• diode: https://www.ebay.de/itm/100pcs-1N5819-5819-1A-40V-SCHOTTKY-DIODE-NEW/182118046640

!!!In my experience, the best way to solder the cells is between 20W and 40W!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Works great (directly and without batteries) with this board (e.g.: charge to phone): https://www.thingiverse.com/thing:3560635
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Have fun, like, and share your Makes...

SG

.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-

########################################################################
NEU Single Cell LiPo Mod: https://www.thingiverse.com/thing:3585097/files
########################################################################

Rahmen für günstiges 6V/0,32A-1,92W DIY Solarmodul. Das Modul habe ich für dieses System gebaut: https://www.thingiverse.com/thing:3524121

• günstig (100 dieser 52mm x 19mm Solarzellen kosten um die 8€. Damit könnt ihr 8 dieser 6V Module bauen / ~ 16W)
• Mehrere in Reihe ergeben dann 12V, 18V, 24V...
• schnell zu drucken
• Die Leistung wird tatsächlich erreicht!

Edit: In den nächsten Tagen werden ich eines dieser Module mit Polyester Harz eingießen (sehr günstiges harz), um zu messen wieviel Leistung die Wetterfestigkeit kostet...

Einkaufsliste:

• Solarzellen: https://www.ebay.de/itm/100-pcs-Solar-Panels-0-5V-320mA-Cell-Charge-52-19mm-Blue-DIY-Useful-Practical/312557546251?hash=item48c5e1ab0b:g:sowAAOSw1V9cgPUZ&frcectupt=true
• Tabwire: https://www.ebay.de/itm/20-M-Tab-Wire-2M-DIY-Solar-Bus-Bar-Wire-Ribbon-10ml-Soldering-Flux-Pen-M7W7/263561778624?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
• Diode: https://www.ebay.de/itm/100pcs-1N5819-5819-1A-40V-SCHOTTKY-DIODE-NEW/182118046640

!!!Die Zellen lassen meiner Erfahrung nach am besten zwischen 20W und 40W verlöten!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Arbeitet super (direkt und ohne Akkus) mit diesem Board (z.B.: Zum Telefon laden) zusammen: https://www.thingiverse.com/thing:3560635
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Habt Spass, liked, und teilt Eure Makes...

SG