Made just to stop the clamps from rotating. I tested, and it's smoother when rotating.
M3 nut cavity have been changed from M3 5.4mm diameter to M3 6mm diameter.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/acxpd66rrOA
| acxpd66rrOA.stl | 406.0KB | |
| Super_Bigery-Densor_2.stl_1.stl | 92.1KB | |
| Super_Bigery-Densor_2.stl_10.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_11.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_12.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_121.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_122.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_123.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_124.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_125.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_126.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_13.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_2.stl | 60.4KB | |
| Super_Bigery-Densor_2.stl_21.stl | 60.4KB | |
| Super_Bigery-Densor_2.stl_3.stl | 32.5KB | |
| Super_Bigery-Densor_2.stl_31.stl | 32.5KB | |
| Super_Bigery-Densor_2.stl_4.stl | 62.5KB | |
| Super_Bigery-Densor_2.stl_41.stl | 62.5KB | |
| Super_Bigery-Densor_2.stl_42.stl | 62.5KB | |
| Super_Bigery-Densor_2.stl_43.stl | 62.5KB | |
| Super_Bigery-Densor_2.stl_5.stl | 67.7KB | |
| Super_Bigery-Densor_2.stl_51.stl | 67.7KB | |
| Super_Bigery-Densor_2.stl_52.stl | 67.7KB | |
| Super_Bigery-Densor_2.stl_53.stl | 67.7KB | |
| Super_Bigery-Densor_2.stl_54.stl | 67.7KB | |
| Super_Bigery-Densor_2.stl_55.stl | 67.7KB | |
| Super_Bigery-Densor_2.stl_56.stl | 67.7KB | |
| Super_Bigery-Densor_2.stl_57.stl | 67.7KB | |
| Super_Bigery-Densor_2.stl_6.stl | 35.3KB | |
| Super_Bigery-Densor_2.stl_61.stl | 35.3KB | |
| Super_Bigery-Densor_2.stl_62.stl | 35.3KB | |
| Super_Bigery-Densor_2.stl_63.stl | 35.3KB | |
| Super_Bigery-Densor_2.stl_7.stl | 51.6KB | |
| Super_Bigery-Densor_2.stl_8.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_81.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_82.stl | 684.0B | |
| Super_Bigery-Densor_2.stl_9.stl | 684.0B |
