FPV-Rover V2.0 (RC Tank) 3D Printer Model
The file 'FPV-Rover V2.0 (RC Tank) 3D Printer Model' is (stl,eepe,zip) file type, size is 9.4MB.
The file 'FPV-Rover V2.0 (RC Tank) 3D Printer Model' is (stl,eepe,zip) file type, size is 9.4MB.
It's finally here. Version 2.0 of the FPV-Rover.
This is the second version of the FPV-Rover.
https://www.thingiverse.com/thing:1240754
This one is with 540 motor (brushed and brushless). This was requested a lot on the other version and I redesigned the whole rover (although it looks the same) for this change.
https://www.instructables.com/id/FPV-Rover-V20
Upgrade 01 (rubber gun):
http://www.thingiverse.com/thing:1269962
Upgrade 02 (trailer):
http://www.thingiverse.com/thing:1700138
Upgrade 03 (GoPro mount):
http://www.thingiverse.com/thing:1936491
Upgrade 04 by Superfly851 (grabatron):
http://www.thingiverse.com/thing:1979227
Upgrade 05(Nerf Dart Launcher)
https://www.thingiverse.com/thing:3835285
Upgrade 06 (Snow Plow)
https://www.thingiverse.com/thing:4630222
Videos on Youtube:
https://youtu.be/dpUSdjNppN0
https://www.youtube.com/watch?v=lbQW_ebiLKA
https://youtu.be/6aBkTEbLCWM (camera tilt)
https://youtu.be/Bfb7bcftKTg (testrun on balcony)
https://youtu.be/AgPFbaMxf3g (Nerf Dart Launcher)
https://youtu.be/ULYmqGeH-P4 (Snow Plow at work)
Latest update: 30.09.2020
| big_bevel_gear_41_V1.3.stl | 301.2KB | |
| big_bevel_gear__21_V1.1.stl | 792.7KB | |
| big_track_V1.1.stl | 93.3KB | |
| body_rover_V1.3.stl | 1006.8KB | |
| camera_mount_left_V1.1.stl | 60.9KB | |
| camera_mount_main_V1.1.stl | 107.3KB | |
| camera_mount_right_V1.1.stl | 43.8KB | |
| esc_mount_left_V1.2.stl | 540.5KB | |
| esc_mount_right_V1.2.stl | 540.5KB | |
| front_cover_V1.3.stl | 946.8KB | |
| front_main_cog_V1.3.stl | 466.2KB | |
| inner-frame-left-v1.5.stl | 2.4MB | |
| inner-frame-right-v1.5.stl | 2.4MB | |
| inner_frame_left_high_V1.0.stl | 5.0MB | |
| inner_frame_right_high_V1.0.stl | 5.0MB | |
| led_mount_V1.2.stl | 96.6KB | |
| motor_mount_V1.3.stl | 828.5KB | |
| outer_frame_V1.3.stl | 1.0MB | |
| rear_cover_V1.2.stl | 489.1KB | |
| rear_main_cog_V1.3.stl | 459.7KB | |
| rover_v2.0.eepe | 76.0KB | |
| rubbertrack_V1.2.stl | 35.6KB | |
| small_bevel_gear_21_V1.1.stl | 341.7KB | |
| small_bevel_gear_41_V1.1.stl | 319.9KB | |
| small_cog_V2.stl | 107.4KB | |
| snowtrack_V1.stl | 448.0KB | |
| STEP-Files.zip | 505.4KB | |
| top_parts_V1.5.stl | 944.0KB | |
| tow-bar_plug_V1.2.stl | 48.2KB | |
| track_V1.3.stl | 263.2KB |
