FPV Goggles Anti-Fog Fan System 3D Printer Model
The file 'FPV Goggles Anti-Fog Fan System 3D Printer Model' is (STL,pdf) file type, size is 350.5KB.
The file 'FPV Goggles Anti-Fog Fan System 3D Printer Model' is (STL,pdf) file type, size is 350.5KB.
This is a home-made version antifog fan system for your FPV Goggles; a must in the cold days!!
This design has been tested on a Fatshark Base SD and Skyzone goggles, but It could work in other models; and remember that you can cut and adapt the eye holes for your goggles.
The design it is based on three 3D printed parts, the foam around the goggles and the small fan. Attached you have the three STL files for printing, and a PDF with the foam templates.
There are two versions of the called FanAirGuide, giving you an extra for those big noses ;).
The small fan selected is a 12v DC 25x25x10mm that could be easily found online. It has been tested from 6v up to 13v, good to be used with a 2-3s LiPo
UPDATES:
-If you have problem with your FPV goggle buttons and the FAN holder ( like in the Fatshark Predator), check out Steve's FAN Adaptor for this goggles
http://www.thingiverse.com/thing:1163521
Enjoy the design and share it !!
| FatSharkSD_FacePart.STL | 34.7KB | |
| FatSharkSD_FanAirGuide.STL | 390.7KB | |
| FatSharkSD_FanAirGuideV2.STL | 342.3KB | |
| FatSharkSD_FanPart.STL | 98.7KB | |
| FatSharkSD_FoamTemplate.pdf | 74.4KB |
