FPV Dolphin PACK: DJI O3 Pan Camera, Hook 3D Printer Model
The file 'FPV Dolphin PACK: DJI O3 Pan Camera, Hook 3D Printer Model' is (stl,f3d) file type, size is 5.6MB.
The file 'FPV Dolphin PACK: DJI O3 Pan Camera, Hook 3D Printer Model' is (stl,f3d) file type, size is 5.6MB.
TPU camera mount is better and has less vibration
I use 270 digital servo
https://aliexpress.ru/item/4000056467965.html?spm=a2g2w.orderdetail.0.0.ab5a4aa6F4lj1j
Check this thing for best motor maunt
https://www.thingiverse.com/thing:5233106
Wall mount hook:
https://amzn.to/4a18DST
My AtomRC Dolphin setup:
DJI O3 AIR UNIT
4S 1550 mAh 3p LiPo
2806.5 1700kv hqprop 7x4.5
ESC iFlight Blitz 80A
Matek 722 wpx with INAV
TBS Crossfire Nano Rx Pro
Jumper T12
tBeacon Onyx
DJI FPV Goggles V2
if you want support me:
https://www.donationalerts.com/r/low_pass_fpv
My videos:
| 30x30_fan_base.stl | 55.8KB | |
| antenna_mount.stl | 318.4KB | |
| Battery_plate.stl | 1.1MB | |
| Camera_mount_base.stl | 253.7KB | |
| Dolphin_pack.f3d | 4.6MB | |
| Dolphin_wall_mount_v2.stl | 25.1KB | |
| Dome.stl | 1.1MB | |
| Hook_for_glue.stl | 136.0KB | |
| Intake.stl | 155.9KB | |
| o3_base.stl | 92.2KB | |
| Servo_base_for_better_fix.stl | 5.7KB | |
| tpu_camera_mount.stl | 326.2KB | |
| Vent_tube.stl | 6.7KB |
