Description Files (7)

Summary

I spent a whole year designing and testing this little device, it was a fun project and I hope you enjoy it as much as I do :) There are still some upgrades on my to-do list that I want to add to this display, I will make a V2 when I have time :)

Print one with each file, except screen holder, you'll need four of them.

Instructions and wiring diagram

https://oscarliang.com/diy-fpv-display-fatshark-module/

Parts List

Hardware

4x M3 nuts (for the case)
4x M3 10mm or 12mm screws (for the case)
4x M2 3.5mm or 4mm screws (for the screen)
3x M3 5mm or 6mm screws (for holding the PCB's and module bay)
2x M3 14mm screw (for cooling fan)

Components

Any Fatshark Receiver Module that is capable of changing channels (I am using True-D V3): https://s.click.aliexpress.com/e/_Dcz1Myx
Pin Headers for Fatshark module: https://s.click.aliexpress.com/e/_Dk6uuVV
Unprotected 18650 Li-Ion Battery (see my recommendations here): https://oscarliang.com/best-18650-li-ion-battery/#Results-and-Recommendations
4.3inch LCD Monitor: https://s.click.aliexpress.com/e/_DDI3OAr
Power switch with LED: https://s.click.aliexpress.com/e/_DBRsHrV
Battery level indicator: https://s.click.aliexpress.com/e/_DCjxWlV
Boost Converter (2V-24V To 5V-28V 2A): https://s.click.aliexpress.com/e/_DDnIXQx
18650 USB Charging module: https://s.click.aliexpress.com/e/_DBoGvFl
22AWG silicone wires (or larger): https://amzn.to/2VqXBD2

Optional

DVR: http://bit.ly/32wc6a2
Slide Switch for DVR: https://s.click.aliexpress.com/e/_Ddfz92b
Fuse (5A or 7.5A): https://amzn.to/2TgJOw8
Cooling fan (20x20mm mounting): https://s.click.aliexpress.com/e/_DmdSddh

bottom.stl	8.2MB
fatshark_module_bay.stl	2.4MB
holder_-_charging_module.stl	142.8KB
holder_-_screen_4x.stl	112.6KB
holder_-_voltage_regulators.stl	143.3KB
slide_switch_cap.stl	7.6KB
top.stl	7.3MB

FPV Display For Fatshark Receiver Module 3D Printer Model