FPV Antenna Tracker For Heavier Antennas (2.4Ghz And 1.3Ghz) 3D Printer Model
The file 'FPV Antenna Tracker For Heavier Antennas (2.4Ghz And 1.3Ghz) 3D Printer Model' is (stl) file type, size is 2.0MB.
The file 'FPV Antenna Tracker For Heavier Antennas (2.4Ghz And 1.3Ghz) 3D Printer Model' is (stl) file type, size is 2.0MB.
This tracker is designed to move a heavier load than my previously published 5.8Ghz tracker. This one is geared. The tracker can also be used to mount a camera to film a plane in flight. The parts needed other than the 16 3D printed items are:
Eagle Tree Eagle Eyes ground station
Eagle Tree power panel.
30 mm inside dia Ball race
30 mm inside dia thrust bearing with washers
2 5K 10-turn potentiometers
2 Standard servos
Asstd M3 machine screws 5mm 10mm 15mm
M5 machine screw 15mm
M5 machine screw 20mm
Build instructions are at https://youtu.be/XWubeGI7OT8
| A_pot_cogs.stl | 749.6KB | |
| B_servo_cogs.stl | 681.1KB | |
| C_tilt_cog.stl | 656.7KB | |
| D_pan_cog.stl | 2.2MB | |
| E_tripod_mount_lower.stl | 3.9MB | |
| F_tripod_mount_upper.stl | 4.8MB | |
| G_tier2_bottom.stl | 4.1MB | |
| I_fixed_servo_plate.stl | 1.6MB | |
| J_rotate_plate.stl | 1.3MB | |
| K_left_arm.stl | 463.6KB | |
| L_right_arm.stl | 785.0KB | |
| M_tilt_arm.stl | 3.2MB | |
| N_battery_tray.stl | 366.9KB |
