FPV Antenna Spinner – Low Profile 3D Printer Model
The file 'FPV Antenna Spinner – Low Profile 3D Printer Model' is (stl) file type, size is 9.3KB.
The file 'FPV Antenna Spinner – Low Profile 3D Printer Model' is (stl) file type, size is 9.3KB.
Unlike my other spinner (see the rest of the Painless360 page) this one if a lot lower profile and will fit in places where you have a tight space. There are two versions - one is slightly deeper to help it stay in place on the SMA nut.
Be aware that this is sized to print perfectly on my Turnigy Fabrikator II printer and not all SMA nuts are identical in size so I'd print one at 100% on your printer and then check the fit. If it's too loose then print at 97% and see how it goes.
Check out my YouTube channel for more builds, tips and tricks!
| SMA_Spinner_V2.0.stl | 37.0KB | |
| SMA_Spinner_V2.1.stl | 44.2KB |
![[FPV] Newbeedrone Mosquito 3D Printer Model](https://cdn.3axis.co/assets/b6/bf/de/7f/b6bfde7f-29cb-4b9f-ab71-65dcc44c62e8/images/79c7ea0c-3597-496c-ad30-e6bf573f2b6c_thumb.jpg)
