Foxeer Wildfire Cover For Skyzone 04X Goggles 3D Printer Model
The file 'Foxeer Wildfire Cover For Skyzone 04X Goggles 3D Printer Model' is (stl) file type, size is 175.7KB.
The file 'Foxeer Wildfire Cover For Skyzone 04X Goggles 3D Printer Model' is (stl) file type, size is 175.7KB.
Skyzone did not make the module bay a standard size to fit modules, so the Foxeer Wildfire does not fit. This is a housing that fits the Foxeer Wildfire module and slots into the Skyzone 04X (V1, V2, Pro) Goggles. I made 15+ test prints dialing this in, the fit is very precise. Careful when slotting module into the goggles to make sure the pins are going into the receiving end. Also, the fan requires desoldering from the board to remove from the stock housing, and resoldering after installing it into this housing.
I mounted the fan on the front of the module vs the side at a 45 degree angle (like the original) because its much easier to print this way, and the airflow is still sufficient.
I made this to perfectly fit my module, however its possible Foxeer isnt very precise with their manufacturing. If your module doesnt fit please comment and I will adjust the tolerances to make it easier to fit.
| Foxeer_Wildfire_housing_for_Skyzone_04X_No_Brand.stl | 320.4KB | |
| Foxeer_Wildfire_housing_for_Skyzone_04X_With_Brand.stl | 359.1KB |
![[FPV] Five33 Tiny Trainer V2 Mods 3D Printer Model](https://cdn.3axis.co/assets/34/8e/73/b5/348e73b5-6593-4c93-b490-dcc8e96305e3/images/d0fa51ee-5c43-40af-bf7c-2ded934af8b7_thumb.jpg)
