Fox Warrior (Hueforge) 3D Printer Model
The file 'Fox Warrior (Hueforge) 3D Printer Model' is (stl) file type, size is 29.3MB.
The file 'Fox Warrior (Hueforge) 3D Printer Model' is (stl) file type, size is 29.3MB.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.5mm
Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Protopasta Dusty Smoke Transmission Distance: 20
PLA PolyLite Red Transmission Distance: 1.5
PLA Overture White Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Dusty Smoke
At layer #10 (0.88mm) swap to Red
At layer #13 (1.12mm) swap to White for the rest.
| Fox_Warrior_Front_200x200.stl | 95.9MB |
![[1DAY_1CAD] SANTA HAT 3D Printer Model](https://cdn.3axis.co/assets/c5/a6/d7/80/c5a6d780-3386-4b63-b679-8326825e9856/images/99f56512-21f3-41fe-8c18-08eb868a29b4_thumb.jpg)
