These are the special tools needed to completely dissasemble the FOX Transfer SL dropper post (both 30,9mm and 31,6mm).
The 18mm internal hex is to be reinforced with six Ø1,8mm steel mandrels from a pop-rivet (see image).
The octagon nut adapter fits inside a 30mm hex socket.
Collapse the dropper before using the octagon nut adapter, or it will not fit.
I made an alternative version of the lock spring preload tool, that fits inside the pipe for reverse dissasembly (on damaged pipes).
This kit also fits the RaceFace Turbine SL.
Instructions for service can be found here: https://tech.ridefox.com/bike/service-procedures/1151/2022-transfer-sl-30.9-or-31.6mm--or--race-face-turbine-sl-rebuild
| Bottom_lug_hex_key.STL | 277.1KB | |
| Lock_spring_preload_tool.STL | 230.9KB | |
| Lock_spring_preload_tool_V2.STL | 301.2KB | |
| Octa_nut_wrench.STL | 330.7KB | |
| Vice_mount_309_L.STL | 304.4KB | |
| Vice_mount_309_R.STL | 304.6KB | |
| Vice_mount_316_L.STL | 287.4KB | |
| Vice_mount_316_R.STL | 287.4KB |
