FOW City House V3 Option 3 – Store 3D Printer Model
The file 'FOW City House V3 Option 3 – Store 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'FOW City House V3 Option 3 – Store 3D Printer Model' is (stl) file type, size is 1.4MB.
3D Built for Flames of War
Main Floor - no support
FIrst Floor - no support
Roof - no support
Bottom plate - no support
You have two option of shutter - open or close (suggest to be place only on the back or the front of the building if you intend to place building against another one...so there will be no opening between house)
Each floor will accomodate 2 medium bases
The size of each floor is 70mm long by 60mm wide and 28mm high
The magnets used for the store sign are 5mm wide by 1mm thick (Same size as the magnet sold by Battlefront).
Buildings can be placed side by side with other buildings to become a townhouse or use as a single house/store.
All City houses can use roofs from other options. You can also interchange the different first floors if you wish.
| FOW_City_House_V8_Store_plate.stl | 1.6KB | |
| FOW_Shutter_windows_close.stl | 7.1KB | |
| FOW_Shutter_windows_open.stl | 9.8KB | |
| FOW_STORE_V3O3_Complete.stl | 1.2MB | |
| FOW_STORE_V3O3_First_Floor.stl | 468.3KB | |
| FOW_STORE_V3O3_Main_Floor.stl | 484.2KB | |
| FOW_STORE_V3O3_Roof.stl | 297.2KB | |
| FOW_STORE_V3_Store_Signs.stl | 2.8MB |
