Formula 1 Tracks 2019 3D Printer Model
The file 'Formula 1 Tracks 2019 3D Printer Model' is (stl,obj) file type, size is 1.2MB.
The file 'Formula 1 Tracks 2019 3D Printer Model' is (stl,obj) file type, size is 1.2MB.
Idea from KurtM88, see "remixed from".
I noticed some of his tracks had different line thicknesses, which I didn't like. So I decided to make my own.
Modelled all tracks myself in Creo Parametric 3 (more on that in "How I designed this").
All tracks were scaled in such a way, that they had a maximum width of 20cm in the orientation I wanted them to hang in the end (except for the Hungaroring, which has an almost square footprint, which would have made it way too tall..). All tracks have a cross-section of 3mm height x 5mm width.
If some of the models don't work, just contact me. I think there might be a problem with Creo 3 and its ability to save as stl. My printing software can work with the .prt file from Creo, so I didn't need stl files (converted them all so I could upload them here).
| 01_australien.stl | 89.3KB | |
| 02_bahrain.stl | 147.8KB | |
| 03_china.stl | 235.5KB | |
| 04_azerbaidjan.obj | 276.0KB | |
| 05_spanien.stl | 306.9KB | |
| 06_monaco.stl | 545.0KB | |
| 07_kanada.stl | 148.9KB | |
| 08_frankreich.stl | 184.8KB | |
| 09_oesterreich.stl | 34.5KB | |
| 10_england.stl | 202.8KB | |
| 11_deutschland.stl | 206.5KB | |
| 12_ungarn.stl | 154.4KB | |
| 13_belgien.stl | 241.5KB | |
| 14_italien.stl | 104.0KB | |
| 15_singapur.obj | 304.5KB | |
| 16_russland.stl | 251.7KB | |
| 17_japan.stl | 275.2KB | |
| 18_mexiko.obj | 302.5KB | |
| 19_usa.stl | 165.0KB | |
| 20_brasilien.stl | 304.6KB | |
| 21_uae.obj | 338.2KB |
