Formicarium V 0.6 3D Printer Model
The file 'Formicarium V 0.6 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'Formicarium V 0.6 3D Printer Model' is (stl) file type, size is 1.4MB.
2024-26-08 - updated everything with the larger locking nuts, I really wasn't happy with the smaller ones!
VERY much a WIP - but I wanted a formicarium with more visibility, and wasn't entirely happy with what else was available.
It's designed to take 90mm Petri dishes, 76/25mm microscope slides and 16mm test tubes,
It goes together with 20-25mm M3 nuts and hex bolts :) (and a fair bit of swearing)
There will be a hydration module and tube adapters later on - but I'm not entirely happy with the connectors, so there may be changes as I get cross and/or start breaking things!
Please do poke if you want to see any particular modules!
:)
| 16mm_tube_nest_adaptor.stl | 238.6KB | |
| Bottom_Nut.stl | 76.3KB | |
| Double_Wall.stl | 187.3KB | |
| Half_Outworld.stl | 252.6KB | |
| Main_Outworld.stl | 958.5KB | |
| Nest.stl | 1.1MB | |
| Single_Wall.stl | 121.3KB | |
| Top_Nut.stl | 86.2KB | |
| Water_Tower.stl | 781.4KB |
