FormFutura ReFill Systems 3D Printer Model
The file 'FormFutura ReFill Systems 3D Printer Model' is (stl) file type, size is 8.8MB.
The file 'FormFutura ReFill Systems 3D Printer Model' is (stl) file type, size is 8.8MB.
ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum.
Find out more about FormFutura ReFill: https://formfutura.com/product/refill-pla/
On this Printables Page you will find the Flanges for all sizes
For the ReFill 500g to 750g coils you can use the 200mm or 245mm Flanges.
The 245mm Flanges are designed for our 2000g to 8000g ReFill coils.
The current flanges can be connected with tie wraps but this printable solution is more reliable and easy to use. Because you can swap and secure your flanges more easily and way faster.
Important
This system works for both 200mm and 245mm flanges but for the 245mm (2KG+) you need to print out the extra spacer called “Flange in place holder -middle 1”
Why would I secure the flanges?
When the flange comes loose your filament can fall off your spool resulting in a mess.
| 200mm_refill_flange.stl | 5.8MB | |
| 200mm_refill_logo-f.stl | 93.4KB | |
| 200mm_refill_logo-label-frame.stl | 988.0KB | |
| 245mm_refill_flange.stl | 5.5MB | |
| 245mm_refill_logo-f.stl | 93.4KB | |
| 245mm_refill_logo-label-frame.stl | 988.0KB | |
| flange-in-place-holder-middle-1.stl | 2.7MB | |
| flange-in-place-holder-modular1.stl | 2.3MB | |
| flange-in-place-holder-modular2.stl | 4.6MB |
