This my attempt to design a forklift in H0 scale. This is not an exact reproduction of a real one but just my attempt to design a forklift for my railway model.
I printed it with a 0.4mm nozzle, 0.1 layer hight.
the main body is splitted in multiple parts that has to be glued. The carriage/lift is not glued but just fitted in the mast and can move quite freely but not to much to avoid the carriage to fall.
The wheel are attached with 4 sewing needles inserted into the body.
I've sanded the part and then printed with acrylic colors.
| barre_elevatore.stl |
| corpo_centrale.stl |
| dx.stl |
| forche_elevatore_1.stl |
| forche_elevatore_2.stl |
| perno_elevatore.stl |
| protezione_elevatore.stl |
| ruota_anteriore_x2.stl |
| ruota_posteriore_x2.stl |
| sx.stl |
| tetto.stl |
| volante.stl |
