Body of a 2017 Ford GT in STL format ready for 3D printing on conventional printers. It is designed to work together with DukeDoks adaptable chassis which you can find here:
Chassis:
https://www.printables.com/model/447947-chassis-110-adaptable-dks-basic
Most parts can be printed without supports, but some require their use. For windows, although they can be printed flat, I recommend printing them vertically for better finishes.
It comes ready to install front and rear led lights.
Wheelbase: 270mm
Approx. dimensions: 470x220x115mm
3D PRINTING SETTINGS
The joints are made with M3 metric screws, and some small parts must be glued with glue.
Required printing area: 220x120mm base and 230mm height.
| aileron.stl | 73.1KB | |
| bodywork_door_left.stl | 63.9KB | |
| bodywork_door_right.stl | 63.9KB | |
| bodywork_front.stl | 235.5KB | |
| bodywork_main_back.stl | 513.5KB | |
| bodywork_main_front.stl | 549.9KB | |
| bodywork_rear.stl | 334.8KB | |
| bodywork_rear_hole_sides_left.stl | 138.5KB | |
| bodywork_rear_hole_sides_right.stl | 138.5KB | |
| bumper_front.stl | 102.0KB | |
| bumper_rear.stl | 143.9KB | |
| bumper_rear_plate.stl | 5.4KB | |
| bumper_side_left.stl | 69.5KB | |
| bumper_side_right.stl | 69.5KB | |
| chassis_bumper_new.stl | 123.6KB | |
| chassis_case_holder_new.stl | 82.7KB | |
| chassis_front_case_holder_new.stl | 56.7KB | |
| lamp_left.stl | 64.8KB | |
| lamp_right.stl | 64.8KB | |
| motor_exhaust.stl | 107.7KB | |
| motor_vent_front_left.stl | 141.4KB | |
| motor_vent_front_right.stl | 141.4KB | |
| motor_vent_rear.stl | 113.9KB | |
| rearview_left.stl | 82.0KB | |
| rearview_right.stl | 82.0KB | |
| rear_light.stl | 985.8KB | |
| rear_light_cover.stl | 8.9KB | |
| rear_light_support_left.stl | 486.8KB | |
| rear_light_support_right.stl | 486.8KB | |
| side_window_left.stl | 28.0KB | |
| side_window_right.stl | 28.0KB | |
| side_window_triangle_left.stl | 4.0KB | |
| side_window_triangle_right.stl | 4.0KB | |
| windshield.stl | 62.2KB |
