i cut up the parts so people with a smaller printer can print them.
when joining them i know it will be under alot of stress so after i did the first join i waited for it to dry then over the top i painted on some super glue and i added tissue paper and warped it around the join, when dry the tissue paper kind of acts like fiberglass ive used the tequnique to repair all sorts of plastic items.
| Clock_Face_Hand_Hour.stl | 44.0KB | |
| Clock_Face_Hand_Minute.stl | 42.5KB | |
| Clock_Face_Hand_Second.stl | 55.0KB | |
| clock_face_LEFT.stl | 3.8MB | |
| clock_face_RIGHT.stl | 3.7MB | |
| clock_frame_1_side_test.stl | 1.5MB | |
| clock_frame_2ed_side.stl | 668.1KB | |
| clock_frame_3ED.stl | 1.4MB | |
| clock_frame_4th.stl | 1.1MB | |
| clock_numbers_quater.stl | 648.3KB | |
| Crank_Gear_Reduction.stl | 67.5KB | |
| Crank_Handle.stl | 35.2KB | |
| Crank_Handle_Screw.stl | 43.1KB | |
| Crank_Shaft.stl | 68.2KB | |
| Escapement_Anchor.stl | 39.1KB | |
| Escapement_Balance.stl | 304.8KB | |
| Escapement_Spring.stl | 439.4KB | |
| Escapement_Wheel.stl | 115.3KB | |
| Frame_Cord_Mount.stl | 79.0KB | |
| Gear_Reduction_Minutes_to_Hours.stl | 201.3KB | |
| Gear_Reduction_Seconds_to_Minutes.stl | 167.1KB | |
| Gear_Wheel_Hours.stl | 149.5KB | |
| Gear_Wheel_Minutes.stl | 198.1KB | |
| Gear_Wheel_Seconds.stl | 145.0KB | |
| Weight_Bucket.stl | 80.1KB | |
| Weight_Bucket_Cover.stl | 48.5KB | |
| Weight_Pulley_A.stl | 62.1KB | |
| Weight_Pulley_B.stl | 41.1KB | |
| Weight_Pulley_Hook.stl | 42.3KB | |
| Winding_Drum_with_Ratchet.stl | 180.7KB | |
| Winding_Gear_Crank.stl | 296.0KB | |
| Winding_Gear_Pawl.stl | 228.2KB | |
| Winding_Gear_Pawl_V2.stl | 241.8KB | |
| Winding_Gear_Transmission.stl | 175.6KB | |
| Winding_Gear_Transmission_V2.stl | 104.7KB | |
| Winding_Planets.stl | 112.6KB | |
| Winding_Planet_Carrier_Cover.stl | 222.7KB | |
| Winding_Planet_Carrier_Drum.stl | 180.6KB | |
| Winding_Planet_Crank_Shaft_Gear.stl | 105.2KB | |
| Winding_Planet_Pawl.stl | 52.8KB | |
| Winding_Planet_Ring_Gear.stl | 318.4KB | |
| Winding_Planet_Roller_Bearing.stl | 468.8KB | |
| Winding_Planet_Sun_Gear_for_Crank.stl | 335.6KB |
