Footbridge (Narrow Gauge) 3D Printer Model
The file 'Footbridge (Narrow Gauge) 3D Printer Model' is (stl) file type, size is 12.1 MB.
The file 'Footbridge (Narrow Gauge) 3D Printer Model' is (stl) file type, size is 12.1 MB.
Please read my profile before downloading.
I sincerely hope others will enjoy my designs. I am always pleased to hear about successful or useful prints. Please post a photo of successful ‘makes’ if you can.
NARROW GAUGE FOOT BRIDGE
This is a development of a tunnel mouth I designed for my model railway which I printed in low relief. I have therefore only printed the front. I hope the full design prints okay - please let me know (politely) if it needs some alterations or corrections.
The spiral staircase took ages to design and I figured it would be a waste to not share it. I will add some photos soon. It's not perfect, some stones are a bit out of place and the top step is smaller than the others.
Dimensions - Full width 154mm, height 80mm. The portal is 42mm high and 35 wide. Each step is 3mm high.
There are some supports under the bridge. These snap off easily after printing.
I'm happy to modify & redevelop in response to requests.
A REQUEST
I have found some of my designs for sale on eBay and Etsy. Please do not use my designs commercially, they have taken me a long time to produce and I share them for free, not for others to make profit.
I am pleased that some of my designs are being used to help raise money for an Air Ambulance charity. I was happy to give my permission for this.
WORK IN PROGRESS!
| NG_Footbridge.stl |
