update 10.03.2023: Improved "Lower" part to combat the problem of food getting stuck in the slider mechanism.
This dispenser design was updated on the 11.04.2022 to Version 2
the new video:
https://youtu.be/i5p_7xmLVT8
I would print all the parts in PLA with 4 parimerters and an infill of 5%
you need:
10 screws ~3mm x 18mm (or just see what screws roughly fit)
2 rubberbands (there should be tention on the mechanism at all times)
or instead 2 Springs with an outer diameter of ~7.5mm, a lenght of ~20mm and a thickness of ~0.5mm
if you choose to print the top piece for an acrylic tube, get one with either an outer diameter of 120mm and an inner of 114mm or an outer diameter of 121mm and an inner of 114mm (you can choose the lenght of the tube)
121mm OD Tube link:
https://www.amazon.de/-/en/gp/product/B08G5CR9Y7/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
these are the links to the mayson jars i used in the video:
2L
https://www.amazon.de/gp/product/B08P9LX9SD/ref=ppx_yo_dt_b_asin_image_o03_s00?ie=UTF8&psc=1
(108.8mm OD)
3.4L
https://www.amazon.de/gp/product/B07B8LR69Z/ref=ppx_yo_dt_b_asin_image_o07_s00?ie=UTF8&psc=1
(101mm OD)
if you want to you can add a rubber ring on the lid. (either print the file i added in TPU or buy one that fits)
| Lid_for_tube_with_114mm_inner_diameter.stl | 288.2KB | |
| lower.stl | 897.4KB | |
| Middle.stl | 80.7KB | |
| Mounting_plate.stl | 171.3KB | |
| OLD_french_cleat_attatchment.stl | 19.8KB | |
| OLD_lower.stl | 911.5KB | |
| OLD_slider.stl | 201.8KB | |
| OLD_spacer.stl | 39.7KB | |
| OLD_upper.stl | 172.2KB | |
| rail_1.stl | 25.1KB | |
| rail_2.stl | 22.3KB | |
| rail_3.stl | 22.3KB | |
| rubber_seal_print_with_TPU.stl | 39.9KB | |
| Slider.stl | 264.3KB | |
| Upper_Acrylic_tube_120.4mm_114.6mm.stl | 696.1KB | |
| Upper_Acrylic_tube_121.4mm_113.6mm.stl | 645.8KB | |
| Upper_custom_117.4mm.stl | 476.9KB | |
| Upper_Entirely_100mm_long_121.4mm_Inner_diameter.stl | 507.8KB | |
| Upper_Entirely_220mm_Long_121.4mm_Inner_diameter.stl | 459.3KB | |
| Upper_Jar_101mm_96.5mm.stl | 963.7KB | |
| Upper_Jar_108.8mm_94mm.stl | 881.9KB |
