Folgertech Kossel 2020 Model For Simplify 3D 3D Printer Model
The file 'Folgertech Kossel 2020 Model For Simplify 3D 3D Printer Model' is (stl) file type, size is 113.5KB.
The file 'Folgertech Kossel 2020 Model For Simplify 3D 3D Printer Model' is (stl) file type, size is 113.5KB.
This is a set of STL files that model up the Folgertech Kossel 2020 which can be set in the Preferences in Simplify 3D so that you can see your printer on the screen. To use the files, put them in a folder and then go into preferences in Simplify 3D and click on the "Machine" tab. Each file is then loaded into the printer models by clicking add. You can load all of them or just some depending on how fast your computer is and how much of the whole printer you want loaded. The X,Y, and Z text components refer to the X,Y, and Z towers and not the X,Y, and Z axis.
Though this was modeled after the Folgertech printer, it will work for any kossel printer that has a 200mm plate. It may also work in other 3D slicing programs that allow your to reference STL files of your printer.
| corner1.stl | 20.2KB | |
| corner2.stl | 20.6KB | |
| corner3.stl | 20.6KB | |
| corner4.stl | 20.2KB | |
| corner5.stl | 20.6KB | |
| corner6.stl | 20.6KB | |
| corner7.stl | 20.2KB | |
| corner8.stl | 20.6KB | |
| corner9.stl | 20.6KB | |
| glass.stl | 20.4KB | |
| glass_holder.stl | 7.7KB | |
| glass_holder_2.stl | 6.9KB | |
| glass_holder_3.stl | 6.9KB | |
| plate.stl | 20.4KB | |
| print_area.stl | 15.9KB | |
| tower_1.stl | 98.5KB | |
| tower_2.stl | 98.5KB | |
| tower_3.stl | 98.5KB | |
| triangle1.stl | 684.0B | |
| triangle2.stl | 684.0B | |
| triangle3.stl | 684.0B | |
| triangle4.stl | 684.0B | |
| triangle5.stl | 684.0B | |
| triangle6.stl | 684.0B | |
| triangle7.stl | 684.0B | |
| triangle8.stl | 684.0B | |
| triangle9.stl | 684.0B | |
| x.stl | 5.4KB | |
| y.stl | 3.2KB | |
| z.stl | 2.8KB |
