Foldable Wall Hook 2024 (Print In Place) 3D Printer Model
The file 'Foldable Wall Hook 2024 (Print In Place) 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'Foldable Wall Hook 2024 (Print In Place) 3D Printer Model' is (stl) file type, size is 1.4MB.
The next version of my simple, foldable wallmount hook (NO support)
(https://www.thingiverse.com/thing:4675334)
I redesigned it to make it a little bit smaller, keep closed and more stable
Added a version with integrated raft
Added versions (normal & raft) for a magnet (8x2mm) which hold the hook closed(Thanks to the suggestion from Jochii). Just glue a magnet in after printing and the hook will attach to the screwhead
Offset pin/hole: 0.3mm circular
Clearence min.: 0.2mm
Faceted at the bottom to prevent first layer from melting together
Print as shown in the pictures (standing)
Recommended print settings for a stable hook (minimum):
5 Walls
5 Top
5 Bottom
50 % infill
| Falthaken_2024_V1.stl | 3.7MB | |
| Falthaken_2024_V1_mag.stl | 3.8MB | |
| Falthaken_2024_V1_mag_raft.stl | 4.0MB | |
| Falthaken_2024_V1_raft.stl | 4.0MB |
