Foldable Towel Holder 3D Printer Model
The file 'Foldable Towel Holder 3D Printer Model' is (stl) file type, size is 77.7KB.
The file 'Foldable Towel Holder 3D Printer Model' is (stl) file type, size is 77.7KB.
I would be very happy about a Tip.
I wanted a space-saving but stable solution for drying towels that could be easily folded up when needed.
The towel rack should be scalable in width (via longer threaded rods) as desired. It should be so stable and robustly built that heavy towels can be dried even on gravel roads while driving, without everything tearing off.
The towel dryer has a radius of 200 mm plus the distance from the wall bracket of 30 mm.
I am working on a version where the two M5 threaded rods are no longer needed to set up the towel dryer.
You need:
2x "Handtuchhalter_v3__gelenk_verstaerkt.stl", 95 % filling
2x "Handtuchhalter_v3_aufnahme.stl", 20 % filling
2x "Handtuchhalter_v3_wandhalter.stl", 20 % filling
2x "Handtuchhalter_v3_arm.stl", 20 % filling
You need:
2x threaded rod M8, the length depends on how wide the towel dryer should be.
6x cap nut, M8
12x washer, M8
2x M8 x 65 mm
2x threaded rod M5, 130 mm (to set up)
4x M5 nut
4x wood screw 3 x 20 mm
Check out my other designs for expedition vehicles and camper vans.
Visit my website for more information: www.science-feles.de.
Ceterum censeo martem esse abeundum.
| Handtuchhalter_v3_arm.stl | 108.0KB | |
| Handtuchhalter_v3_aufnahme.stl | 75.1KB | |
| Handtuchhalter_v3_wandhalter.stl | 116.3KB | |
| Handtuchhalter_v3__gelenk_verstaerkt.stl | 46.1KB |
