Foldable Smart Phone Holder 3D Printer Model
The file 'Foldable Smart Phone Holder 3D Printer Model' is (stl) file type, size is 444.2KB.
The file 'Foldable Smart Phone Holder 3D Printer Model' is (stl) file type, size is 444.2KB.
foldable smart phone holder
smooth and easy opening due to interlocking
43 cm of ø0.8 mm steel wire is required - 2x 22mm; 2x 27mm; 4x 83mm
place the components and insert the wires. seal the holes with a little glue.
two magnets with ø3 x 3mm are required
| 11.stl | 537.8KB | |
| 12.stl | 539.7KB | |
| 21.stl | 134.1KB | |
| 22.stl | 152.3KB | |
| 31.stl | 146.7KB | |
| 32.stl | 138.9KB | |
| 41_4x.stl | 62.8KB |
