Hands free on the beerfestival!
I designed a new beerglas holder especially for Brugs beer festival.
see the older version: https://www.thingiverse.com/thing:5334431
this is designed for the glass used there.
It is designed for the Use of 2x M4x20 Screw with 2x M4 Nut
There is a Fully printable Version. use 2x dowels instead (and press them in).
Actually, after testing some of those prints, i do recommend to use the fully printed version.
theoretically the use without screw or dowel is possible, but there is no more foldabillity, and there is less stability.
please keep in mind, that the printing orientation is essential for ALL parts.
Ring and slider shall be printed laying on the bed (and without Support; 50% infill).
Dowels as well but with Support (20% infill).
Have Fun and see you on the Festival
cheers
| bab-m4-dowel.stl | 177.4KB | |
| bab-simple-ring_text1.stl | 3.7MB | |
| bab-simple-slider.stl | 1.2MB |
