Fokker Dr.1 Triplane 3D Printer Model Free Download

Description Files (34)

Summary

This is a remix of a model by DigitalTargeter with some improvements:

Wheel and tire are separate parts
Engine and engine cowling are separate parts
Redesigned cockpit with a separate rim to represent historical leather cockpit lip
Tail and wingtip skids
Aircraft markings are more detailed:
- Two sizes of Iron Cross are available (smaller intended for the vertical stabilizer)
- Bar Crosses available as an alternative to the Iron Cross
- Each type of cross has two options for its backing (see photos for examples)
  - A backing that matches the contour of the cross
  - A backing plate that matches the contour of the fuselage or wing (note: a heat gun is required for the Wing Cross Backing -- otherwise use Wing Cross Backing Short)

Bar_Cross_Large.stl	1.3KB
Bar_Cross_Large_Backing.stl	1.3KB
Bar_Cross_Small.stl	1.3KB
Bar_Cross_Small_Backing.stl	1.3KB
Cockpit.stl	20.4KB
Cockpit_Rim.stl	17.7KB
Cross_Fuselage_Backing.stl	6.8KB
Cross_Wing_Backing.stl	17.5KB
Cross_Wing_Backing_Short.stl	17.5KB
Engine.stl	311.7KB
Engine_Cowling.stl	78.3KB
Engine_Cowling_Hole_Filling.stl	10.6KB
Fuselage_Lower.stl	55.2KB
Fuselage_Underwing_Block.stl	6.5KB
Fuselage_Upper.stl	184.4KB
Horizontal_Stabilizer.stl	113.8KB
Iron_Cross_Backing_Large.stl	11.4KB
Iron_Cross_Large.stl	10.6KB
Iron_Cross_Small.stl	9.7KB
Iron_Cross_Small_Backing.stl	8.1KB
Propeller.stl	181.1KB
Spandau_Gun.stl	47.5KB
Tail_Skid.stl	6.5KB
Tire.stl	443.7KB
Undercarriage_V-Strut.stl	36.0KB
Vertical_Stabilizer.stl	198.9KB
Wheel.stl	36.1KB
Wingtip_Skid.stl	4.0KB
Wing_-_Lower.stl	125.1KB
Wing_-_Middle.stl	143.9KB
Wing_-_Undercarriage.stl	25.0KB
Wing_-_Upper.stl	59.6KB
Wing_Strut.stl	11.2KB
Wing_V-Strut.stl	42.7KB