Foghorn Leghorn – Onepiece 3D Printer Model
The file 'Foghorn Leghorn – Onepiece 3D Printer Model' is (stl) file type, size is 6.3MB.
The file 'Foghorn Leghorn – Onepiece 3D Printer Model' is (stl) file type, size is 6.3MB.
Foghorn Leghorn, a cartoon character in the Looney Tunes and Merrie Melodies series of short films by Warner Bros.
This is a onepiece version of Foghorn based on my multi-part Foghorn model that I've previously posted.
Since I do not have an SLA printer, I teamed up with maker Kyler Stern to do the printing and painting.
I converted my multi-part model to a onepiece model for SLA and FDM printing. Kyler then proceeded as follows:
Foghorn: Decrease size from original to 3 Inches tall
Scale: X: 1.76, Y: 2.19, Z: 3.00 Inch = 59.63% of original size
Printer: Anycubic Photon M3
Resin: Anycubic Water-Wash Resin+ Grey
Layer Thickness: 0.05 mm
Hollowed body.
Print time: 5 hours
Note: Something important to call out regarding print time. Kyler has his screen power set to 80% power. This increases print time significantly but extends screen life. This might be important for individuals going forward.
Other notes regarding the supplied STL file:
For FDM and SLA printing, size the STL file as needed for your purpose and add Slicer supports.
Enjoy!
| foghorn_onepiece.stl | 14.2MB |
