Foden Steam Omnibus 3D Printer Model
The file 'Foden Steam Omnibus 3D Printer Model' is (stl) file type, size is 9.4MB.
The file 'Foden Steam Omnibus 3D Printer Model' is (stl) file type, size is 9.4MB.
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models:
https://www.coppermineminiatures.co.uk/product-page/foden-c-type-omnibus-solid-wheels
During research for modelling the Foden steam lorry I found also pictures of a bus version. After a while I decided to create this version to. Here it is. Hope someone has use of it for his model rail road layout or just for display. I would be happy to see your version!
For one bus you need to print:
1x Carriage (normal or with open driver door)
1x Roof
1x Wheels fore (straight, or turning left/right)
2x wheel aft
Optional driver (driving or entering)
All models sized for British n-scale (1:148), although it works also in bigger scale – as you can see from pictures (I printed a version in H0-scale for a friend). Conversion values:
Continental N-scale, 1:160 -> 92.5%
TT-gauge, 1:120 -> 123%
HO/H0-gauge, 1:87 -> 170%
OO/00-gauge, 1:76 -> 195%
S-gauge, 1:64 -> 231%
O-gauge, 1:48 -> 308%
For good order it should be mentioned, that this model, as the lorry one is using the great work made by Andy Scriven:
| Foden-Omnibus_1-148_carriage.stl | 11.3MB | |
| Foden-Omnibus_1-148_carriage_door_open.stl | 11.3MB | |
| Foden-Omnibus_1-148_Driver_getting_on.stl | 419.6KB | |
| Foden-Omnibus_1-148_Driver_sitting-left.stl | 238.9KB | |
| Foden-Omnibus_1-148_Roof_complete.stl | 2.4MB | |
| Foden-Omnibus_1-148_Wheels_fore_left.stl | 2.1MB | |
| Foden-Omnibus_1-148_Wheels_fore_right.stl | 2.1MB | |
| Foden-Omnibus_1-148_Wheels_fore_straight.stl | 2.1MB | |
| Foden-Omnibus_1-148_Wheel_aft.stl | 980.9KB |
