A binocular mount that fits a Focal tripod shoe.
Printed in PETG with three perimeters for added strength. The print uses 15% infill from the base up to about where the washer makes contact (at 65 mm). From there up to the top I switched to 100% infill. This ensures I don't crush the part when tightening the bolt.
| Focal_Tripod_Binocular_Mount.3mf | 317.6KB | |
| Focal_Tripod_Binocular_Mount.stl | 1003.5KB | |
| Focal_Tripod_Binocular_Mount_0.4n_0.2mm_PETG_MK4IS_1h15m.bgcode | 667.5KB |
