its a nice pice of work
the DXF can be used to make G-code
| pos_01_boden_con.dxf | 100.0KB | |
| pos_02_saule_con.dxf | 29.6KB | |
| pos_03_oben.dxf | 102.0KB | |
| pos_03_oben_V2.dxf | 100.8KB | |
| pos_04_podest_S120x150x250.dxf | 106.8KB | |
| pos_04_podest_S250.dxf | 106.2KB | |
| pos_05_saulenanbindung.dxf | 100.1KB | |
| pos_06_saule_100.dxf | 29.3KB | |
| pos_07_sockel_45_oben.dxf | 20.0KB | |
| trafalgar.stl | 951.4KB |
