Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA Overture Space Gray Transmission Distance: 2.1
PLA PolyLite Cream Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Space Gray
At layer #12 (1.04mm) swap to Cream
At layer #13 (1.12mm) swap to Ivory White for the rest.
| Edward_Elric_Front_200x200.stl | 95.9MB |
