Flywoo FlyLens 85 And 75 Walksnail Avatar HD Mini V3 VTX Bracket 3D Printer Model
The file 'Flywoo FlyLens 85 And 75 Walksnail Avatar HD Mini V3 VTX Bracket 3D Printer Model' is (stl) file type, size is 106.0KB.
The file 'Flywoo FlyLens 85 And 75 Walksnail Avatar HD Mini V3 VTX Bracket 3D Printer Model' is (stl) file type, size is 106.0KB.
I took the “thick” version of Vladamyr https://www.printables.com/model/788874-flylens7585-dji-o3-vtx-guard after asking permission and I remixed to fit the Walksnail mini vtx V3,
I reduced the cage height sincethe avatar mini is not as tall as the o3,
since i didn't want to use more screws to fix it in place, I added four pins (size M3) so i could press fit the 20x20 holes of the vtx on the bottom of the bracket
I created two versions:
“HeatInsert” needs the same heat inserts as the original cage, so you'll need to get those, can find the right size in the original creator model page description
“ScrewOn” has smaller holes that directly fits in the screws, might not be as secure as the heat inserts, also you might want to get longer screws since not the whole thread is used with the stock screws
| HeatInsertCage.stl | 175.6KB | |
| ScrewOnCage.stl | 226.8KB |
