Flying The Flag 3D Printer Model
The file 'Flying The Flag 3D Printer Model' is (STL) file type, size is 3.2MB.
The file 'Flying The Flag 3D Printer Model' is (STL) file type, size is 3.2MB.
The "Flying the Flag Cryptex" is a physical puzzle designed around the concept of LGBTQI+ pride and flag symbolism. It consists of a cryptex with six colored rings (red, orange, yellow, green, blue, purple), each containing 10 digits from 0 to 9. These rings are arranged on a cylinder, seated on a round base, and are secured with a round lid on top.
This puzzle is part of an Erasmus+ project called D3PO and was co-funded by the European Union.
PROJECT NUMBER : 2021-1-ES01-KA220-ADU-000035313
The European Commission support for the production of this publication does not constitute an endorsement of the contents which reflects the views only of the authors, and the Commission cannot be held responsible for any use which may be made of the information contained therein.
For more information, please visit https://d3po.infoproject.eu
| encoder_ring_rev.1.STL | 1.3MB | |
| inner_cap.STL | 11.1MB | |
| inner_crypt_cylinder_rev1.STL | 3.7MB | |
| number_ring.STL | 5.4MB | |
| outer_cylinder.STL | 4.9MB | |
| right_cap_rev1.STL | 6.0MB |
