Unflown modeling so any improvement you guys see let me know. as of right now i have not tried making a landing gear mount.
about the idea on this is i always wanted a gws slow stick/slo v. So with a bit of free time i designed this for a left over Carbonfiber rod i had laying around. right now vtail set up is the only option
all parts has been tested for fitment and so far its looking great. This used a vtail set up and requires 2 zip ties to sandwich the tail on.
Updated 5/5/19
servo area extended 1mm wider to fit better. Wing mount now has rubber band hooks. updated pictures of how it would look.
parts required are
Carbonfiber rod 10mm 500mm(can be found on Banggood)
dollar store foam(just cut , bend and assemble wing and tail of your design you like)
2 9g servos some sanding required to get a nice fit. holes line up to add screws.
motor mount is for a 2205 (all i had laying around)
esc that you like
battery of you chose im using a 2s 500mah
few 3mm hex bolt screws(had alot from past quad builds
all parts are printed from PETG
| battery.stl | 192.7KB | |
| esc.stl | 138.9KB | |
| front_wing.stl | 84.3KB | |
| motor_mount.stl | 772.2KB | |
| rear_wing.stl | 90.1KB | |
| servo.stl | 174.1KB | |
| tail.stl | 73.6KB | |
| tail_2.stl | 234.1KB |
